OIL RE-REFINING UNIT
[CODE NO. 1858]
Now-a-days engine oil has become an important factor for automobile and other purposes and since the prices of all petroleum products have gone up. It has become extremely necessary to refine used engine oil which could be reused as original. Keeping this view Defense Research (Materials), Kanpur has developed a very simple process which envisages utilization of sulphuric acid, activated clay and filter aid as the raw materials and the suggested reclaimed economical unit for this industry is 200 tons per annum, and estimated capital outlay is Rs.1.5 lacs.
Engine oil becomes contaminated with foreign material in service. In circulating systems, where a substantial quantity of oil is involved, it is desirable to maintain it as clean as possible to provide maximum working efficiency and to keep wear and damage of lubricated parts to a minimum.
Reconditioning of a used oil may be accomplished by a continuous by pass or batch methods or combination of these. In the continuous system the entire amount of the oil from main pressure line is continuously filtered. In the by pass system a fraction of the total is continuously filtered.
COST ESTIMATION
Plant Capacity 28.00 MT/day
Land & Building (1834 Sq.Mtr) Existing
Plant & Machinery Rs 1.50 Cr
W.C. for 1 Month Rs.3.99 Cr
Total Capital Investment Rs 5.60 Cr
Rate of Return 54%
Break Even Point 36%
PRODUCT DESCRIPTION
USES AND SCOPE
PURIFICATION AND RECLAMATION OF OIL
PROPERTIES OF USED AND REGENERATED ENGINE OIL
B. I. S. SPECIFICATION
B. I. S. SPECIFICATION FOR AUTOMOTIVE INTERNAL
COMBUSTION-ENGINE LUBRICATING OILS
METHOD OF TEST FOR STABLE POUR POINT (CLAUSE 5.1
AND TABLE 1)
ADDITIVES FOR LUBRICANTS
CHARACTERISTICS OF LUBRICATING OILS
DESIRABLE CHARACTERSTICS IN LUBRICANTS
MARKET SURVEY
OVERVIEW OF PETROLEUM OIL AND LUBRICANTS
CHEMISTRY & COMPOSITION OF CRUDE PETROLEUM
USED OIL AND ITS COMPOSITION
METHOD AND STEP INVOLVED IN RE-REFINING OF USED OIL
MANUFACTURING PROCESS
PROCESS FLOWSHEET FOR RECLAIMATION OF USED ENGINE OIL
PROCESS DEVELOPED AT R.R.L. JORHAT
EXISTING PROCESSES FOR REGENERATION OF USED ENGINE OILS PROCESSES
THE NEW PROCESS HAS FIVE BASIS STEPS
RE-REFINING OF USED LUBRICATING OIL BY SOLVENT
EXTRACTION AND VACUUM DISTILLATION FOLLOWED BY
HYDROTREATING
RE-REFINING OF USED LUBE OILS BY SOLVENT/
CLAYPERCOLATION PROCESSES
PRODUCTION ECONOMICS
PLANT LOCATION 79
PROCESS FOR FUTURE EXPANSION & DIVERSIFICATION
PLANT LAYOUT DIAGRAM
STAFF & LABOUR REQUIREMENTS
ORGANISATION CHART
LAY OUT OF THE PLANT ACCORDING TO LAND AND
BUILDING CALCULATION
SUPPLIERS OF RAW MATERIALS
SUPPLIERS OF PLANT & MACHINERIES
COMPLETE PLANT SUPPLIERS
MANUFACTURERS/SUPPLIERS OF PLANT AND MACHINERIES
APPENDIX – A :
1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET
