PLASTER OF PARIS
Plaster is one of the oldest known synthetic building materials: it was used by the Egyptians at least 4000 years ago in the construction of the pyramids, and the Greeks were producing decorative plaster work by 500 BC. The chemistry of the conversion of gypsum to plaster was also investigated early on by chemists such as Le Chatelier (1850 - 1936) and vant Hoff (1852 - 1911). Plaster is made by heating gypsum (CaSO4.2H2O) powder, thus converting it to calcium sulphate hemihydrate (CaSO4.=H2O). The hemihydrate is also known as stucco or Plaster of Paris . probably so named because of the very large deposit of pure gypsum found beneath Paris. When water is added to the stucco, the material rehydrates to give a solid mass of gypsum. This rehydration is accompanied by an increase in temperature and a slight expansion of the plaster, causing the gypsum to perfectly fill a mould. Plaster of Paris (POP) chemically is hemi-hydrate of calcium sulfate produced by calcinations / heat treatment of gypsum, a di-hydrate of calcium sulfate. It finds its application in various areas of construction, ceramic, chalk pieces, medical (dental and surgical), sculpting, etc. Physically POP is described in a and (3 form, a referring to crystalline form and 03 referring to amorphous form. In India only (3 form is produced and all further discussion refers to only this form.
Cost Estimation
Plant Capacity 100 MT./Day
Land & Building (Area 5000 sq.mt.) Rs. 6.28 Cr.
Plant & Machinery Rs. 1.60 Cr.
W.C. for 1 Months Rs. 7.97 Cr.
Total Capital Investment Rs. 16.14 Cr.
Rate of Return 40%
Break Even Point 36%
• EIRI can modify the Capacity of the Project and Total Capital Investment as per your requirement.
• Note: The project investment cost and capacity are subject to change without any notice. Future projects may have different values of project cost and capacity.
MARKET SURVEY CUM DETAILED TECHNO
ECONOMIC FEASIBILITY REPORT
covers
- Introduction
- Uses and Applications
- Properties
- Market Survey with future aspects
- Present Manufacturers
- Detailed Process of Manufacture
- Formulations
- B.I.S. Specifications
- Process Flow Sheet Diagram, Plant Layout,
- Cost Economics with Profitability Analysis
- Capacity
- Land & Building Requirements with Rates
- List & Details of Plant and Machinery with their Costs
- Raw Materials Details/List and Costs
- Power & Water Requirements
- Labour/Staff Requirements
- Utilities and Overheads
- Total Capital Investment
- Turnover
- Cost of Production
- Break Even Point
- Profitability
- Land Man Ratio
- Suppliers of Plant & Machineries and Raw Materials
- Cash Flow Statement
- Repayment Schedule
- Interest Chart
- Depreciation Chart
-
Projected Balance Sheet for 5 Years etc.
