MUSTARD OIL (EXPELLER) (EIRI-1035)
Primitive mills and presses for extraction of oils from seeds have been in use sevice long. Mechanization came with the introduction of the hydraulic press by the end of the 18th Century. This too was replaced by the more efficient screw press or expeller towards the end of the last century. They are more commonly classified according to their capacity for absorbing iodine i.e. Iodine value. Those with a high proportion of double bonds are called drying oils, those intermediate in capacity are called semidrying and those of low capacity non-drying. In general the non-drying and semi-drying oils are used as foods and as lubricants and the drying oils as paint and varnish ingredients. This distinction has never been a very precise one and is becoming less so as oils formerly classified as semi-drying such as soyabean are being used more and more in paints varnishes and other products that dry in a highly satisfactory way.
Cost Estimation
Plant Capacity 1.50 MT./Day
Land & Building (Area 800 Sq.Mt.) Rs. 30 Lacs
Plant & Machinery Rs. 8 Lacs
W.C. for 1 Months Rs. 19 Lacs
Total Capital Investment Rs. 58 Lacs
Rate of Return 84%
Break Even Point 25%
• EIRI can modify the Capacity of the Project and Total Capital Investment as per your requirement.
• Note: The project investment cost and capacity are subject to change without any notice. Future projects may have different values of project cost and capacity.
MARKET SURVEY CUM DETAILED TECHNO
ECONOMIC FEASIBILITY REPORT covers
* Introduction
* Uses and Applications
* Properties
* Market Survey with future aspects
* Present Manufacturers
* Detailed Process of Manufacture
* Formulations
* B.I.S. Specifications
* Process Flow Sheet Diagram, Plant Layout,
* Cost Economics with Profitability Analysis
* Capacity
* Land & Building Requirements with Rates
* List & Details of Plant and Machinery with their Costs
* Raw Materials Details/List and Costs
* Power & Water Requirements
* Labour/Staff Requirements
* Utilities and Overheads
* Total Capital Investment
* Turnover
* Cost of Production
* Break Even Point
* Profitability
* Land Man Ratio
* Suppliers of Plant & Machineries and Raw Materials
* Cash Flow Statement
* Repayment Schedule
* Interest Chart
* Depreciation Chart
* Projected Balance Sheet for 5 Years etc.
