LPG SURAKSHA HOSE (RUBBER TUBES - DOMESTIC & COMMERCIAL)
[CODE NO. 3156]
With LPG comes the need for Safety – and to ensure safety, Suraksha Products, after many years of R & D, had produced the first Suraksha LPG Hose, a steel wire re-inforced LPG Hose, far superior to the other LPG Hose in use. 'Suraksha LPG Hose' The three-layer construction with wire-braiding provides strength and durability apart from making it leak-proof. The wire braiding ensures that the LPG connection is safe even if rodents attack the hose. The outer-most layer of the hose is flame resistant, and does not develop cuts and cracks easily, which is the most common reason for leakages.
Being tough and ozone/weather-resistant, the 'Suraksha LPG Rubber Hose' has a serviceable life of a minimum of 5 years.
In terms of safety, durability and strength, no other Hose can match up to Suraksha LPG Hose rubber hose for liquefied petroleum gases (LPG) for a maximum working pressure of 2.5 MPa for Type 1, Type 2 and Type 3 hoses and 1.0 MPa for Type 4 hoses at a maximum temperature of 65°C.
Type 1: Single or double braided or spirally lapped wire. Additional plies of either braided fabric or rubber may be applied immediately under or over the wire braids.
Type 2: Textile plies in cord, woven or braided form, together with two or more electrical bonding wires of corrosion and fatigue material.
Type 3: Textile plies in cord, woven or braided form, or metallic cord together with at least one helix of heavy steel wire embedded in the rubber. Type 4: Wire reinforced hose for domestic/commercial installations.
COST ESTIMATION
Plant Capacity : 2500.00 Nos./day
Land & Building (3000 Sq.Mt) : Rs. 1.75 Cr
Plant & Machinery : Rs. 1.56 cr
Working Capital for 2 Months : Rs. 95.22 Lacs
Total Capital Investment : Rs. 4.46 Cr
Rate of Return : 48%
Break Even Point : 46%
INTRODUCTION
SAFETY WARNING: IMPROPER SELECTION, INSTALLATION OR
MAINTENANCE OF HOSE MAY RESULT IN PREMATURE FAILURES,
PROPERTY DAMAGE OR BODILY INJURY.
PROPERTIES
USES AND APPLICATION
B.I.S. SPECIFICATION
Market survey
MANUFACTURERS/SUPPLIERS OF LPG SURAKSHA HOSE
MANUFACTURING PROCESS
QUALITY CONTROL TESTING CHART
PLANT LAYOUT
PRINCIPLES OF PLANT LAYOUT
PLANT LOCATION FACTORS
EXPLANATION OF TERMS USED IN THE PROJECT REPORT
PROJECT IMPLEMENTATION SCHEDULES
SUPPLIERS OF PLANT AND MACHINERY
APPENDIX – A:
1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET