INDUSTRIAL PAINT AND INKS (VARIOUS TYPES)
[CODE NO. 766]
Organic coatings are composed of pigments suspended in a vehicle. The vehicle or carrier consists primarily of a resinuous of driers, plasticizers and stabilizers as required. As the paint film dries, these vehicles changes from a liquid to the solid film by one or more of several mechanisms.
1. Evaporation of Solvents.
2. Oxidation (of a drying oil).
3. Polymerization through application of heat, addition of catalyst, or combination of reactive components.
The pigments contribute such properties as inhibitions of a metal surface (red lead & zinc chromate), reinforcement of the film, stabilization against deterioration by sunlight, controlled chalking (titanium oxide) and colour clear coating (varnishes, lacquers & shellac) are not pigmented.
Inorganic coatings such as the zinc silicates also may be though of as a pigment suspended in a vehicle. In this case, the pigment con consists of metallic zinc dust, and the vehicle is a blend of water soluble silicates.
Terminology sometimes is confecesing. "Paint" usually refers to materials applied primarily for their decorative effect and any protection received is of secondary importance. The term coating or "protective coating" on the other hand generally is received for use when protecting is the primary consideration.
The alkyd resins form the largest groups of synthetic resins available to the paint industry. Alkyd finish in general shows good gloss and gloss retention. These resins are employed in stroving enamels quick drying paints, stoving coatings in conjunction with amino resins, marine paints etc.
COST ESTIMATION
lant Capacity 3.00 MT/day
Land & Building (1 Acre) Rs. 2.93 Cr
Plant & Machinery Rs 1.21 Cr
W.C. for 3 Months Rs.2.83 Cr
Total Capital Investment Rs 7.14Cr
Rate of Return 29%
Break Even Point 48%
INTRODUCTION
PROPERTIES OF INK
OFFSET PRINTING INKS
PROPERTIES OF PAINTS
FLOW REQUIREMENT OF OFFSET INK
USE & APPLICATION OF PRINTING INK
B I S SPECIFICATION
COMPOSITION OF INKS
WATER BASED INK
MARKET SURVEY
OVERVIEW OF PRINTING AND PRINTING INK
STRUCTURE AND STATUS OF PRINTING INK IN INDIA
MANUFACTURERS/EXPORTERS/SUPPLIERS OF PAINTS
PRINCIPLES OF PAINT FORMULATIONS
FORMULATION OF AUTOMOTIVE PAINT
FORMULATION OF PROTECTIVE PAINT
LIME COLOURS & DRY DISTEMPER
MANUFACTURING PROCESS
ENAMEL PAINTS
RED OXIDE PRIMER
TYPES & USES OF VARIOUS MICA PAINTS
PROCESS OF MANUFACTURERS & FORMULATIONS OF THINNER
PROCESS FLOW SHEET FOR MANUFACTURE OF THINNERS
BASIS STEPS FOR PAINT MANUFACTURING
PROCESS DESCRIPTION OF PAINT
BLOCK FLOW DIAGRAM FOR PAINT MANUFACTURE
FORMULATION OF INK
MANUFACTURING PROCESS OF FLEXOGRAPHIC INK
MANUFACTURING PROCESS OF PRINTING INK
PROCESS FLOW SHEET
PRINCIPLES OF INK FORMULATION
DRYING OF SYNTHETIC INKS BY AIR CURING
MANUFACTURE OF OFFSET PRINTING INKS
SCREEN PRINTING INKS
MANUFACTURING PROCESS AND FORMULATION OF WATER
BASED INK
FORMULATION OF WATER BASED INK
WHITE DISPOSAL IN PAINT INDUSTRY
WASTE MINIMIZATION METHOD FOR PAINT INDUSTRY
SUPPLIERS OF RAW MATERIALS
SUPPLIERS OF PLANT AND MACHINERY
ADDRESS FOR GOVT. CLEARANCE DEPARTMENT
APPENDIX – A :
1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT