FORMULA OF PRINTING INKS ON HDPE LAMINATED OR UNLAMINATED BAGS
[CODE NO. 2045]
HDPE Ink is used for surface printed application on HDPE Woven Sacks specially for fertilizer grade packing, suitable for roll to bag and bag to bag printing.
The printing on the Bags is done using these printing Inks through flexographic printing technology.
Today’s printing inks are composed of a pigment a binder (an oil, resin or varnish of some kind), a solvent and various additives such as drying and chelating agents. The exact recipe for a given ink depends on the type of surface that it will be printing on and the printing method that will be used. Inks have been designed to print on a wide range of surfaces from metals, plastics and fabrics through to papers. The various printing methods are all similar, in that the ink is applied to a plate / cylinder and this is applied to the surface to be printed. However, the plate / cylinder can be made of metal or rubber, and the image can be raised up above the surface of the plate, in the plane of the plate but chemically treated to attract the ink, or etched into the plate and the excess ink scraped off. Different inks are produced to suit these different conditions.
COST ESTIMATION
Plant Capacity 1000.00 KGS/day
Land & Building (1000 Sq.mt) Rs. 1.17 Cr
Plant & Machinery Rs. 25.00 Lacs
W.C. for 2 Months Rs. 61.80 Lacs
Total Capital Investment Rs. 2.09 Cr
Rate of Return 33%
Break Even Point 49%
INTRODUCTION
PROPERTIES AND CHARACTERISTICS
B I S SPECIFICATION
MARKET SURVEY
PRODUCTION OF PRINTING INKS IN INDIA
GLOBAL MARKET POSITION OF PRINTING INK
PRESENT MANUFACTURERS OF PRINTING INKS
RAW MATERIALS & ADDITIVES
SOLVENT BASED SYSTEM
FORMULATION OF PRINTING INK FOR HDPE
LAMINATED/UNLAMINATED BAGS
OTHER FORMULATIONS OF PRINTING INK
MANUFACTURING PROCESS OF PRINTING INK FOR HDPE LAMINATE OR UNLAMINATE BAGS
PROCESS IN DETAILS
PROCESS FLOW DIAGRAM
PLANT LAYOUT
PRINCIPLES OF PLANT LAYOUT
PLANT LOCATION FACTORS
EXPLANATION OF TERMS USED IN THE PROJECT REPORT
PROJECT IMPLEMENTATION SCHEDULES
SUPPLIERS OF RAW MATERIALS
SUPPLIERS OF PLANT AND MACHINERIES
APPENDIX – A :
1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET