ROTOGRAVURE PRINTING (FOR FLEXIBLE PACKAGING) (EIRI-1057)
A pouch is similar to a bag except it is simpler in constructions and is made from roll stock, filled and sealed on automatic high speed machinery. There are many possible variations of pouch sizes, shapes and compositions. Few general types can be described. Pouches can be defined as vertical or horizontal, depending on how they are formed. Vertical pouches are made by drawing one or two webs downward a forming mandrel, sealing one or two seats to form a tube and adding a top and bottom seal for closure than ne side seal is used and centured, it is called a pillow type. If the side seal is inserted on one side and a fold on the other, it is called a three side seal pouch. When two side seals are used it is called a four side seal poucher firm-sealed pouch. The product is added while the pouch is in the vertical position and usually before it is reserved from the web. Side seams can be lapped or butted and qussets are optional.
Cost Estimation
Plant Capacity 3 MT./Day
Land and Building (Area 2500 sq.mt.) Rs. 2.57 Cr.
Plant & Machinery Rs. 1.97 Cr.
W.C. for 2 Months Rs. 7.33 Lacs
Total Capital Investment Rs. 12.24 Lacs
Rate of Return 64%
Break Even Point 29%
• EIRI can modify the Capacity of the Project and Total Capital Investment as per your requirement.
• Note: The project investment cost and capacity are subject to change without any notice. Future projects may have different values of project cost and capacity.
MARKET SURVEY CUM DETAILED TECHNO
ECONOMIC FEASIBILITY REPORT
covers
- Introduction
- Uses and Applications
- Properties
- Market Survey with future aspects
- Present Manufacturers
- Detailed Process of Manufacture
- Formulations
- B.I.S. Specifications
- Process Flow Sheet Diagram, Plant Layout,
- Cost Economics with Profitability Analysis
- Capacity
- Land & Building Requirements with Rates
- List & Details of Plant and Machinery with their Costs
- Raw Materials Details/List and Costs
- Power & Water Requirements
- Labour/Staff Requirements
- Utilities and Overheads
- Total Capital Investment
- Turnover
- Cost of Production
- Break Even Point
- Profitability
- Land Man Ratio
- Suppliers of Plant & Machineries and Raw Materials
- Cash Flow Statement
- Repayment Schedule
- Interest Chart
- Depreciation Chart
-
Projected Balance Sheet for 5 Years etc.
