ELECTRIC WATER HEATER
[EIRI/EDPR/1571] J.C. 366
INTRODUCTION
Electric water heaters provide a ready supply of hot water at not more than 85oC temperature. The water heaters have two sections: the internal water tank which stores the water to be heated electrically, and the external cover. A thermal insulation material is placed in the space between the two sections. Water is electrically heated and the temperature is thermostatically controlled. The normal capacity of electrical water heaters is between 25 to 200 litters. Electrical water heaters are installed in home, hotels, hospitals, restaurants and in other places where there is need of hot water for washing and cleaning.
Storage type of automatic electric water heater is one which incorporates a thermo insulated water storage tank in which water is electrically heated and the temperature is thermostatically controlled.
Instantaneous geyser in an equipment which heats the water instantly ready for use. The geyser is normally connected with two pipes one for incoming water supply and second one outlet for supply of hot water. This is called instantaneous geysers as hot water can be received instantaneously and the same is hot stored as in the storage type electric water heaters.
Storage type automatic electric water heaters are designed to provide a ready supply of hot water at a maximum water temperature of 85oC and they are available normally in capacities ranging from 6 to 200 litres. Most commonly tyes of heaters are 25 and 35 litres capacity. The power requirements for this type of heaters very between 1 and 5 kilo watts.
COST ESTIMATION
Plant Capacity 21 Nos/Day
Land & Building (1000 sq.mt.) Rs. 1.05 Cr
Plant & Machinery Rs. 28.72 Lac
Working Capital for 2 Months Rs. 29.45 Lac
Total Capital Investment Rs. 1.78 Cr
Rate of Return 28%
Break Even Point 65%
CONTENTS
INTRODUCTION
USES AND APPLICATION
B.I.S. SPECIFICATION
MARKET OF ELECTRIC WATER HEATER
MANUFACTURERS/SUPPLIERS OF Electric Water Heater
MANUFACTURING PROCESS
TESTING OF ELECTRIC WATER HEATER
PROCESS FLOW CHART
TECHNICAL SPECIFICATION
PRINCIPLES OF PLANT LAYOUT
PLANT LOCATION FACTORS
EXPLANATION OF TERMS USED IN THE PROJECT REPORT
PROJECT IMPLEMENTATION SCHEDULES
SUPPLIERS OF RAW MATERIALS
SUPPLIERS OF PLANT AND MACHINERY
APPENDIX – A:
01. PLANT ECONOMICS
02. LAND & BUILDING
03. PLANT AND MACHINERY
04. OTHER FIXED ASSESTS
05. FIXED CAPITAL
06. RAW MATERIAL
07. SALARY AND WAGES
08. UTILITIES AND OVERHEADS
09. TOTAL WORKING CAPITAL
10. TOTAL CAPITAL INVESTMENT
11. COST OF PRODUCTION
12. TURN OVER/ANNUM
13. BREAK EVEN POINT
14. RESOURCES FOR FINANCE
15. INSTALMENT PAYABLE IN 5 YEARS
16. DEPRECIATION CHART FOR 5 YEARS
17. PROFIT ANALYSIS FOR 5 YEARS
18. PROJECTED BALANCE SHEET FOR (5 YEARS)
