COPPER FOIL
[CODE NO. 5644]
Metals other than iron and steel are desscribed as non-ferrrous metals. For example, Almunium, Bronze, Copper, Lead, Silver, Zinc & other precious metals. Copper is the perfect material for recycling. It is valuable, ewasy to identify, easy to clean, heavy and can be of much use to foundries, melters,& other non-ferrous industries, as scrap. Copper has many important alloy eg.bronze (contains copper, tin & Zinc) and brass (which contains copper & zinc only). To discourage thefts,scraps are packed in oil drum & hammered the ends over.
Pure copper may include scraps from factories making copper products, usually they reclaim if themselves, but ends of copper tubes used is domestic water systems & other buildings, prices of electrical machines, wire & power cable etc.
The commercial copper for industrial purposes cover lake copper, electrolytic copper & fire-refined copper.
Lake copper may be low-resistance or high-resistance copper. The low-resistance lake copper, used for electrical purposes, may be electrolytically or fire-refined. This copper must contain copper + silver content 99.9% or above.
High resistance lake copper has its resistivity exceeding 0.15694 international ohm (meter,gram) at 20 deg C. Its copper + silver + arsenic content is not less than 99.9%.
Electrolytic copper specification are similiar to the low-resistance lake copper. Similiar to the low-resistance lake copper. Fire-refined copper , other than lake, is used for rolling into sheets & shapes but it is not acceptable for electrical uses. It is not acceptable for electrical uses. Fire-refined copper for Wrought Products and Alloys, calls for the following analysis: Cu + Ag = 99.88% (min),As = 0.012% (max.) Sb + 0.003% Max., Se + Te = 0.025% max., Ni = 0.05% max., Bi = 0.003% max. Pb = 0.004% max.
COST ESTIMATION
Plant capacity 10.00 MT/day
Land & Building (2 Acres) Rs. 4.02 Cr
Plant & Machinery Rs. 86.00 Lacs
W.C. for 3 Months Rs. 23.23 Cr
Total Capital Investment Rs. 28.23 Cr
Rate of Return 59%
Break Even Point 23%
APPENDIX – A :
1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET
