CARBOXY METHYL CELLULOSE (CMC)
[EIRI/EDPR/0698] (J.C.:9308)
INTRODUCTION
Carboxy Methyl Cellulose a chemical of demonstrated usefullness in scores of applications and of suggested applicability in hundreds nevertheless required several decades to attain genuine industrial status. The product was first developed in Germany toward the end of World War I by Jansen, but it was until the late 1930's and particularly during and since World War II. That large scale uses began to energe & commercial production appeared justified.
Following the appearance of a report, the detergency improving characteristics of SCMC were confirmed in laboratory tests. Extensive investigations were under taken by research groups with a view toward developing a CMC with the high grade soaps and synthetic detergents already available on the market. At the same time production methods were subjected to scruting. CMC had received the impetus necessary for the launching of a new Industrial Chemical & a start had been made toward the development of a process for its manufacture.
COST ESTIMATION
Plant Capacity 10 MT/Day
Land & Building (5000 sq.mt.) Rs. 2.76 Cr
Plant & Machinery Rs. 1.96 Cr
Working Capital for 3 Months Rs. 5.16 Cr
Total Capital Investment Rs. 10.31 Cr
Rate of Return 28%
Break Even Point 55%
CONTENTS
INTRODUCTION
PROPERTIES
B.I.S. SPECIFICATION
DETERMINATION OF SODIUM CHLORIDE
USES AND APPLICATION
RAW MATERIALS
MARKET SURVEY ON CARBOXY METHYL CELULOSE
DEMAND OF CMC
MANUFACTURERS, SUPPLIERS AND EXPORTERS OF CARBOXYMETHYL CELLULOSE
MANUFACTURING PROCESS OF CARBOXY METHYL CELLULOSE FROM ALCOHOL AND COTTON BINTER:-
RAW MATERIAL REQUIREMENT
PROCESS FLOW SHEET
MANUFACTURING PROCEESS OF WOOD PULP
MANUFACTURE OF CMC BY BATCH POROCESS
CONTINOUS PROCESS USING COTTON LINTERS
FLOW DIAGRAM OF CMC MANUFACTURE
CHACES OF LOSS IN PROCESS SECTIONS
MATERIAL OF CONSTRUCTION
MATERIAL HANDLING EQUIPMENT
END USES OF THE PRODUCT
ADDRESSES OF RAW MATERIAL SUPPLIERS
COMPLETE PLANT SUPPLIERS ON TURNKEY BASIS FOR CARBOXYMETHYL CELLULOSE
SUPPLIERS OF PLANT AND MACHINERY
PLANT LAYOUT OF CMC
APPENDIX – A:
01. PLANT ECONOMICS
02. LAND & BUILDING
03. PLANT AND MACHINERY
04. OTHER FIXED ASSESTS
05. FIXED CAPITAL
06. RAW MATERIAL
07. SALARY AND WAGES
08. UTILITIES AND OVERHEADS
09. TOTAL WORKING CAPITAL
10. TOTAL CAPITAL INVESTMENT
11. COST OF PRODUCTION
12. TURN OVER/ANNUM
13. BREAK EVEN POINT
14. RESOURCES FOR FINANCE
15. INSTALMENT PAYABLE IN 5 YEARS
16. DEPRECIATION CHART FOR 5 YEARS
17. PROFIT ANALYSIS FOR 5 YEARS
18. PROJECTED BALANCE SHEET FOR (5 YEARS)
