BRICKS FROM FLY ASH (EIRI-1007)
Bricks may be made from a no. of different kinds of material, but they must usually possess (can be capable of developing) a certain amount of plasticity. fly ash is one of them. Fly-ash is an industrial waste of thermal power stations using pulverised coal. it is finely divided residue, resulting from the combustion of pulverised coal in the boiler, which is transported by the flue gases and subsequently collected by means of electrical or mechanical precipitators. There are about 40 major thermal power plants in India which produces about 15 million tones of fly ash every year. Such enormous quantities need huge dumping grounds, and create pollution problems. Fly ash being a puzzolanie material forms cementations products in conjunction with time and thus find use in civil Engineering Works. In advanced countries fly ash has been used in variety of product during the last 2-3 decades. Whereas in this country a very limited use of fly ash has been made in hydraulic structures. However, very little has been done on the diversified use of lips fly ash viz. in road construction soil slabbing precast block etc.
Cost Estimation
Plant Capacity 30000 Nos./Day
Land & Building (Area 3 Acres) Rs. 2.70 Cr.
Plant & Machinery Rs. 86 Lacs
W.C. for 1 Months Rs. 15 Lacs
Total Capital Investment Rs. 4.15 Cr.
Rate of Return 19%
Break Even Point 65%
• EIRI can modify the Capacity of the Project and Total Capital Investment as per your requirement.
• Note: The project investment cost and capacity are subject to change without any notice. Future projects may have different values of project cost and capacity.
MARKET SURVEY CUM DETAILED TECHNO
ECONOMIC FEASIBILITY REPORT covers
- Introduction
- Uses and Applications
- Properties
- Market Survey with future aspects
- Present Manufacturers
- Detailed Process of Manufacture
- Formulations
- B.I.S. Specifications
- Process Flow Sheet Diagram, Plant Layout,
- Cost Economics with Profitability Analysis
- Capacity
- Land & Building Requirements with Rates
- List & Details of Plant and Machinery with their Costs
- Raw Materials Details/List and Costs
- Power & Water Requirements
- Labour/Staff Requirements
- Utilities and Overheads
- Total Capital Investment
- Turnover
- Cost of Production
- Break Even Point
- Profitability
- Land Man Ratio
- Suppliers of Plant & Machineries and Raw Materials
- Cash Flow Statement
- Repayment Schedule
- Interest Chart
- Depreciation Chart
- Projected Balance Sheet for 5 Years etc.
-
