ADHESIVE MANUFACTURING (WATER BASED,
SOLVENT BASED AND ACRYLIC BASED)
[CODE NO.9337]
Latex based adhesives are of special importance for cementing porous surfaces due to their ability to wet such
surfaces. On the other angle the porosity allows the latex adhesive to dry out thus producing a strong coherent film.
Sodium silicate, glue, albumen gums and starch etc. are compatible with natural latex and exert a stabilising action.
The latex rubber in the adhesive film imparts flexibility and strength and protects and bond against dynamic fatigue.
Latex based adhesives contain a rubber latex, adhesion modifiers, plasticisers, curatives, fillers such as whiting and
kaolin, thickness e.g. cellulose derivatives and other additives e.g. antioxidants, surfactants antifoams (Octyl alcohol,
silicons), antifreeze, stabilizers corrosion inhibitor colourants, deodorants, and reodorants etc.
COST ESTIMATION
Plant Capacity 1.25 MT./day
Land & Building (2000 Sq.Mtr) Rs 2.74 Cr
Plant & Machinery Rs 46.76 Lacs
W.C. for 1 Month Rs.51.38 Lacs
Total Capital Investment Rs 3.79 Cr
Rate of Return 42%
Break Even Point 42%
1. INTRODUCTION
2. USES AND APPLICATION
3. STRUCTURAL ACRYLIC ADHESIVES
4. B.I.S.SPECIFICATION
5. PROPERTIES OF ACRYLIC BASED ADHESIVE
6. MARKET SERVEY
7. PRESENT MANUFACTURE OF S.R ADHESIVE
8. PROPERTIES OF LATEX BASED ADHESIVES
VERSUS SOLVENT BASED ADHESIVE
9. RAW MATERIALS
10. FORMULATIONS FOR WATER BASED LATEX ADHESIVES
11. PROCESS OF MANUFACTURE
12. FLOW SHEET
13. FORMULATION OF SYNTHETIC RUBBER ADHESIVE
(SR ADHESIVE) LIKE PIDILITE TYPE
14. MANUFACTURING PROCESS OF SYNTHETIC RUBBER ADHESIVE
15. PROCESS FLOW DIAGRAM FOR SYNTHETIC RUBBER ADHESIVE
OTHER FORMULATIONS OF SYNTHETIC RUBBER AND
LATEX BASED ADHESIVE
16. MANUFACTURING PROCESS OF RUBBER ADHESIVE
17. PROCESS FLOW SHEET FOR MANUFACTURING OF
RUBBER ADHESIVE
18. WATER-BASED GENERAL PURPOSE ADHESIVE (BUDATIENE
ACRYLONITRILE/RESIN)
19. FORMULATION OF ACRYLIC BASED ADHESIVE
20. PROCESS FLOW DIAGRAM FOR THE MANUFACTURE OF
PRESSURE-SENSITVE ADH ESIVE FOR BOPP TAPES
(ACRYLIC BASED)
21. PROCESS FLOW SHEET
22. TESTING OF ADHESIVES
23. ADDRESSES OF CONSULTANTS
24. ADDRESSES OF RAW MATERIALS SUPPLIERS
25. ADDRESSES OF PLANT & MACHINERY SUPPLIERS
26. PLANT LAYOUT
APPENDIX – A :
1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET
