WALL PUTTY (WHITE CEMENT BASED)
[CODE NO.3878]
White cement based Wall Putty a plastering material to fill the holes and patches before paint primer or distemper.
In general, fillers & stoppers are paste-like materials, highly pigmented, used to fill surface imperfections (fillers) and to make good gross surface defects prior to painting operations (stoppers).
Caulking compounds, putties and same cements have a boiled drying oil, usually combine with resins that act as the binder putty is the thick mixture of finally powdered calcium carbonate (whiting) and acid refined linseed oil which imparts good wetting and grinding characteristics.
White Cement Based Wall Putty is a specially formulated product based on white cement blended with special fillers and additives to be used as putty, filler & sealer, on concrete / mortar walls and ceiling for both interiors & exteriors. It renders to the surface, smooth bright white coating suitable for over coating by different kinds of water and solvent based paints, of attractive colors, giving a durable and smooth finish on the walls. It is water resistant and in turn, imparts additional strength to the walls. It also contains fungicides, preventing fungus. The other feature of the product is that though it is based on cement, but unlike cement paint, it does not require any water for curing.
Technical Data
Requirement of water: 40-45% mixing of paint for application
Pot life: 2 to 3 hours
Hard Drying: 6 to 8 hours
Overcoat ability: 3 to 4 hours
Maximum thickness of total coats: 1.5 mm
Covering on smooth surface: 22-25 sqft / kg / mm
Direction for Use
1. Ensure that wall surface is free from loose particles and any greasy / oily substance by cleaning the surface with emery paper, knifing blade or wire brush as suitable, and wash the wall by water properly.
2. Mix Wall Putty with 40-45% clean water slowly under hand stirring. Continue stirring till a uniform paste is formed.
3. Apply first coat uniformly on already moistened surface with the help of putty blade or trowel. Allow the surface to dry for minimum 3 hours and then apply a second coat. Allow drying for 6 to 8 hours preferably overnight for complete drying depending on ambient temperature and humidity condition.
4. After drying, if needed, the surface should be rubbed with water proof 300-320 mesh emery paper and washed with water. The surface is now ready for application of paint.
Precautions
1. Store in a cool dry place.
COST ESTIMATION
Plant Capacity 200 MT/Day
Land & Building (3000 sq.mt.) Rs. 2.03 Cr
Plant & Machinery Rs. 3.95 Cr
Working Capital for 2 Months Rs. 7.42 Cr
Total Capital Investment Rs. 13.60 Cr
Rate of Return 51%
Break Even Point 34%
- INTRODUCTION
- TECHNICAL DATA
- DIRECTION FOR USE
- PRECAUTIONS
- USES AND APPLICATIONS
- B.I.S. SPECIFICATION
- MARKET POSITION
- MARKET SIZE AND PAST GROWTH
- MAJOR PLAYERS
- KEY CHALLENGES
- GROWTH DRIVERS AND FUTURE OUTLOOK
- GROWTH IN URBAN HOUSING SECTOR:
- GROWTH IN END-USE MARKET:
- MARKET SHARE OF CONSTRUCTION CHEMICALS
- GLOBAL CONSTRUCTION CHEMICALS CONSUMPTION
- OVERVIEW OF CONSTRUCTION CHEMICALS
- U.S. CONSTRUCTION CHEMICALS MARKET REVENUE, BY PRODUCT,
- 2013 - 2024 (USD MILLION)
- PRODUCT INSIGHTS
- END-USE INSIGHTS
- REGIONAL INSIGHTS
- COMPETITIVE INSIGHTS
- MAJOR PLAYERS OF CONSTRUCTION CHEMICALS
- PRESENT MANUFACTURERS/SUPPLIERS OF WALL PUTTY
- USES AND FEATURES OF INTEGRAL WATER PROOFING COMPOUND
- USES:
- FEATURES:
- PRECAUTION AND LIMITATION OF INTEGRAL WATER PROOFING
- TECHNICAL DATA:
- DOSAGE:
- PACKAGING:
- SHELF LIFE:
- HEALTH & SAFETY:
- FORMULATION OF WALL PUTTY (WHITE CEMENT BASED)
- MANUFACTURING PROCESS OF DRY WALL PUTTY (WHITE CEMENT BASED)
- PROPERTIES OF INTERGRAL WATER PROOFING COMPOUND IN LIQUID FORM
- FORMULATION OF INTERGRAL WATER PROOFING COMPOUND
- PROCESS FLOW DIEGRAM
- SUPPLIERS OF PLANT & MACHINERY
- SUPPLIERS OF PLANT & MACHINERIES (IMPORTED)
- SUPPLIERS OF RAW MATERIALS
APPENDIX – A:
01. PLANT ECONOMICS
02. LAND & BUILDING
03. PLANT AND MACHINERY
04. OTHER FIXED ASSESTS
05. FIXED CAPITAL
06. RAW MATERIAL
07. SALARY AND WAGES
08. UTILITIES AND OVERHEADS
09. TOTAL WORKING CAPITAL
10. TOTAL CAPITAL INVESTMENT
11. COST OF PRODUCTION
12. TURN OVER/ANNUM
13. BREAK EVEN POINT
14. RESOURCES FOR FINANCE
15. INSTALMENT PAYABLE IN 5 YEARS
16. DEPRECIATION CHART FOR 5 YEARS
17. PROFIT ANALYSIS FOR 5 YEARS
18. PROJECTED BALANCE SHEET FOR (5 YEARS)