PRE ENGINEERED BUILDINGS
[CODE NO.4337]
Pre Engineered Buildings (PEB) is the buildings which are engineered at a factory and assembled at site. Usually PEBs are steel structures. Built-up sections are fabricated at the factory to exact size, transported to site and assembled at site with bolted connections. This type of Structural Concept is generally used to build Industrial Buildings, Metro Stations, Warehouses etc.
The adoptability of PEB in the place of Conventional Steel Building design concept resulted in many advantages, including economy & easier fabrication. These type of building structure can be finished internally to serve any functions that is actually help in low rise building design. Examples of Pre-Engineered Buildings are warehouses, Canopies, Factories, Bridges etc.
Pre-Engineered Steel Buildings use a combination of built-up sections, hot rolled sections and cold formed elements which provide the basic steel frame work with a choice of single skin sheeting with added insulation or insulated sandwich panels for roofing and wall cladding. The concept is designed to provide a complete building envelope system which is air tight, energy efficient, optimum in weight and cost and, above all, designed to fit user requirement like a well fitted glove.
These Pre-Engineered Steel Buildings can be fitted with different structural accessories including mezzanine floors, canopies, fascias, interior partitions, crane systems etc. The building is made water-tight by use of special mastic beads, filler strips and trims. This is a very versatile building system and can be finished internally to serve any required function and accessorized externally to achieve attractive and distinctive architectural styles. It is most suitable for any low-rise building and offers numerous benefits over conventional buildings.
Pre-engineered buildings are generally low rise buildings, however the maximum eave heights can go upto 25 to 30 metres. Low rise buildings are ideal for offices, houses, showrooms, shop fronts etc. The application of pre-engineered concept to low rise buildings is very economical and speedy. Buildings can be constructed in less than half the normal time especially when complimented with other engineered sub-systems.
COST ESTIMATION
Plant Capacity 12 MT/Day
Land & Building (8000 sq.mt.) Rs. 7.14 Cr
Plant & Machinery Rs. 3.81 Cr
Working Capital for 2 Months Rs. 5.15 Cr
Total Capital Investment Rs. 16.49 Cr
Rate of Return 26%
Break Even Point 58%
- INTRODUCTION
- VARIOUS SYSTEMS IN PEB
- PRIMARY SYSTEM
- SECONDARY SYSTEM
- WIND BRACING SYSTEM
- ROOFING & CLADDING SYSTEM
- ACCESSORIES
- FINISHING
- COMPONENTS OF PEB
- MAIN FRAMING
- END WALL FRAMING
- PURLINS, GIRTS AND EAVE STRUTS
- THE PURLINS ARE SUBJECTED TO THE FOLLOWING LOADS:-
- THE GIRTS ARE SUBJECTED TO THE FOLLOWING LOADS:-
- THE EAVE STRUTS ARE SUBJECTED TO THE FOLLOWING LOADS:-
- PANELS AND INSULATION
- MEZZANINE SYSTEM
- BRACING SYSTEM
- PAINTS AND FINISHES
- DOORS AND WINDOWS
- FALSE CEILING
- PARTITION WALLS
- FLOORING
- ADVANTAGES OF PEB:
- BENEFITS
- DISADVANTAGES OF PEB
- USES AND APPLICATION
- B.I.S. SPECIFICATION
- PROCESS FLOW CHART FOR PEB
- FABRICATION PROCESS OF PEB
- CUTTING
- CNC PLASMA & OXY GAS
- CNC (6100 X 20) MM SHEARING MACHINE
- CNC (6100 X 12) MM SHEARING MACHINE
- EQUIPMENT AND MACHINES:
- HOLE PUNCHING
- ASSEMBLING
- VERTICAL ASSEMBLING
- HOT ROLLED ASSEMBLING
- AUTOMATIC ASSEMBLING MACHINE
- EQUIPMENT AND MACHINES
- WELDING AND CONNECTION DETAILS WELDING
- MANUAL WELDING AND DETAILING
- EQUIPMENT AND MACHINES
- SURFACE CLEANING
- SHOT BLASTING MACHINE, ROOM (8000 X 20000 X 6000 MM)
- EQUIPMENT AND MACHINES:
- PAINTING
- PAINTING MACHINE
- EQUIPMENT AND MACHINES
- LOADING
- QUALITY CONTROL
- FOR FABRICATION PROCESS
- FABRICATION TOLERANCES:
- STRAIGHTNESS:
- TWISTS:
- CAMBER:
- LENGTH:
- TYPE OF MEMBER TOLERANCE
- SQUARE-NESS AT END OF MEMBERS
- BUTT JOINTS
- DEPTH OF MEMBER
- WEB PLATES:
- FLANGE PLATES:
- COLUMN FABRICATION TOLERANCES:
- CRANE RUNWAY GIRDER FABRICATION TOLERANCES:
- GIRDER ENDS:
- CRANE GIRDER ALIGNMENT:
- FOR HOLING PROCESS
- FOR WELDING PROCESS
- INSPECTION OF WELDS:
- TESTS ON WELDS:
- (1) MAGNETIC PARTICLE TEST:
- (2) DYE PENETRATION TEST:
- (3) RADIOGRAPHIC INSPECTION:
- TESTING OF FABRICATION COMPONTS
- (6) ROOF SHEETING:
- (7) WALL PANELS:
- (8) HEETING FASTENERS:
- (9) SEALER:
- (10) CLOSURES:
- (11) FLASHING AND TRIM:
- (12) ROOF & WALL BRACINGS:
- (14) PAINTING FOR STRUCTURAL STEEL WORK:
- QUALITY CONTROL
- MARKET POSITION
- DRIVERS
- BRIEF MARKET RESEARCH ANALYSIS
- BY MATERIAL
- BY APPLICATION
- KEY PLAYERS
- INDIA PEB MARKET
- SOME MORE INSIGHTS
- KEY VENDORS
- OTHER PROMINENT VENDORS
- GOVERNMENTS INITIATIVE IN GROWTH OF PEB
- THE CHALLENGES
- PEB ADVANTAGE
- PLANT LAYOUT
- SUPPLIERS OF PEB STRUCTURE
- SUPPLIERS OF RAW MATERIALS
- SUPPLIERS OF STRUCTURAL STEEL PLATE
- SUPPLIERS OF STRUCTURAL STEEL SHEET PLATE
- SUPPLIERS OF MIG WELDING WIRE ELECTRODE
- SUPPLIERS OF ZINC INGOT
- SUPPLIERS OF CAUSTIC SODA
- SUPPLIERS OF HYDROCHLORIC ACID
- SUPPLIERS OF DEGREASING CHEMICAL
- SUPPLIERS OF PLANT AND MACHINERY
- SUPPLIERS OF UNCOILING MACHINE
- SUPPLIERS OF SHEET LAVELING MACHINE
- SUPPLIERS OF PUNCHING PRESS
- SUPPLIERS OF POWER PRESS
- SUPPLIERS OF SHEARING MACHINE
- SUPPLIERS OF ROLLING MACHINE
- SUPPLIERS OF BENDING MACHINE
- SUPPLIERS OF CNC PLASMA CUTTING MACHINE
- SUPPLIERS OF COLD ROLL FORMING MACHINE
- SUPPLIERS OF WELDING MACHINE
- SUPPLIERS OF MIG WELDING MACHINE
- SUPPLIERS OF AUTOMATIC H-BEAM WELDING MACHINE
- SUPPLIERS OF PAINTING EQUIPMENTS
- SUPPLIERS OF EOT CRANES
- SUPPLIERS OF POWER TRANSFORMERS
- SUPPLIERS OF ELECTRICAL PANEL
- SUPPLIERS OF ELECTRIC MOTOR
- SUPPLIERS OF EFFLUENT TREATMENT PLANT (ETP PLANT)
- SUPPLIERS OF AIR POLLUTION CONTROL EQUIPMENTS
- SUPPLIERS OF AIR CONDITIONING EQUIPMENTS
- SUPPLIERS OF AIR COMPRESSORS
- SUPPLIERS OF PLATFORM WEIGHING MACHINE
- SUPPLIERS OF MATERIAL HANDLING EQUIPMENTS
- SUPPLIERS OF FIRE FIGHTING EQUIPMENTS
- SUPPLIERS OF SHOT BLASTING MACHINE
- SUPPLIERS OF JIGS AND FIXTURE
- SUPPLIERS OF SUBMERSIBLE WATER PUMP
APPENDIX – A:
01. PLANT ECONOMICS
02. LAND & BUILDING
03. PLANT AND MACHINERY
04. OTHER FIXED ASSESTS
05. FIXED CAPITAL
06. RAW MATERIAL
07. SALARY AND WAGES
08. UTILITIES AND OVERHEADS
09. TOTAL WORKING CAPITAL
10. TOTAL CAPITAL INVESTMENT
11. COST OF PRODUCTION
12. TURN OVER/ANNUM
13. BREAK EVEN POINT
14. RESOURCES FOR FINANCE
15. INSTALMENT PAYABLE IN 5 YEARS
16. DEPRECIATION CHART FOR 5 YEARS
17. PROFIT ANALYSIS FOR 5 YEARS
18. PROJECTED BALANCE SHEET FOR (5 YEARS)
