BRASS PIPE FITTING
[CODE NO.4138]
Fittings are used in pipe and plumbing systems to connect straight pipe or tubing sections, to adapt to different sizes or shapes, to branch or re-direct the piping system and if necessary to provide a jointing method if 2 dissimiliar piping materials are used in the one system. Fittings for pipe and tubing are most often made from the same base material as the pipe or tubing being connected, e.g., stainless steel, steel, copper or plastic. However, any material that is allowed by code may be used, but must be compatible with the other materials in the system, the fluids being transported, and the temperatures and pressures inside and outside of the system. For example, brass-bodied fittings are common in otherwise copper piping and plumbing systems. The photographs below show some common fittings that are used in piping systems.
Pipe fittings are an important component of the plumbing system. In plumbing, many types of fixtures are joined with the help of various types of material as per the requirement. Fittings are fixed in the plumbing system to join straight pipes or any section of tubes. We can say that the water-supply fittings like elbow, tee, socket, reducer, etc., are fitted to change the direction of flow, distribute the water supply from the main pipe to other pipes of equal size or lower size, etc.
Any part used in connection with water supply, distribution, measurement, controlling, use and disposal of water is known as a pipe fitting.
COST ESTIMATION
Plant Capacity 2.4 MT/Day
Land & Building (2500 sq.mt.) Rs. 1.76 Cr
Plant & Machinery Rs. 2 Cr
Working Capital for 2 Months Rs. 4.45 Cr
Total Capital Investment Rs. 8.45 Cr
Rate of Return 36%
Break Even Point 48%
- INTRODUCTION
- IDENTIFYING BASIC PIPE FITTINGS
- 1. ELBOW
- 2. TEE
- 3. CROSS
- 4. REDUCER
- 5. CAP OR PLUG
- BENEFITS OF USING BRASS PIPE FITTING
- USES AND APPLICATION
- PLUMBING
- REGULATIONS
- HYGIENE
- B.I.S. SPECIFICATION
- PROCESS FLOW DIAGRAM
- MANUFACTURING PROCESS
- CUTTING BRASS RODS
- HOT PRESS FORGING
- PROCESSING EDGES
- POLISHING SURFACE
- CNC MACHINING
- MARKET OVERVIEW
- KEY TAKEAWAYS
- MARKET CHALLENGES
- PRINCIPLES OF PLANT LAYOUT
- MAJOR PROVISIONS IN ROAD PLANNING FOR
- MULTIPURPOSE SERVICE ARE:
- PLANT LOCATION FACTORS
- 1. RAW-MATERIAL SUPPLY:
- 2. MARKETS:
- 3. POWER AND FUEL SUPPLY:
- 4. WATER SUPPLY:
- 5. CLIMATE:
- 6. TRANSPORTATION:
- 7. WASTE DISPOSAL:
- 8. LABOR:
- 9. REGULATORY LAWS:
- 10. TAXES:
- 11. SITE CHARACTERISTICS:
- 12. COMMUNITY FACTORS:
- 13. VULNERABILITY TO WARTIME ATTACK:
- 14. FLOOD AND FIRE CONTROL:
- EXPLANATION OF TERMS USED IN THE PROJECT REPORT
- 1. DEPRECIATION:
- 2. FIXED ASSETS:
- 3. WORKING CAPITAL:
- 4. BREAK-EVEN POINT:
- 5. OTHER FIXED EXPENSES:
- 6. MARGIN MONEY:
- 7. TOTAL LOAD:
- 8. LAND AREA/MAN POWER RATIO:
- PROJECT IMPLEMENTATION SCHEDULES
- INTRODUCTION
- PROJECT HANDLING
- PROJECT SCHEDULING
- PROJECT CONSTRUCTION SCHEDULE
- TIME SCHEDULE
- PLANT LAYOUT
- SUPPLIERS OF BRASS PIPE FITTING
- SUPPLIERS OF RAW MATERIALS
- SUPPLIERS OF BRASS ROD
- SUPPLIERS OF DEGREASING CHEMICAL
- SUPPLIERS OF PICKLING CHEMICALS
- SUPPLIERS OF PLANT AND MACHINERY
- CHINA SUPPLIERS OF HOT FORGING MACHINE
- SUPPLIERS OF CLOSE DIE HOT FORGING MACHINE
- SUPPLIERS OF FORGING DIES
- SUPPLIERS OF BRASS BAR CUTTING MACHINE
- SUPPLIERS OF ELECTRIC MOTOR
- SUPPLIERS OF COOLING TOWER
- SUPPLIERS OF EFFULENT TREATMENT PLANT (ETP PLANT)
- SUPPLIERS OF AIR POLLUTION CONTROL EQUIPMENTS
- SUPPLIERS OF AIR CONDITIONING EQUIPMENTS
- SUPPLIERS OF AIR COMPRESSORS
- SUPPLIERS OF PLATFORM WEIGHING MACHINE
- SUPPLIERS OF MATERIAL HANDLING EQUIPMENTS
- SUPPLIERS OF FIRE FIGHTING EQUIPMENTS
- SUPPLIERS OF SHOT BLASTING MACHINE
- SUPPLIERS OF JIGS AND FIXTURE
- SUPPLIERS OF SUBMERSIBLE WATER PUMP
APPENDIX – A:
01. PLANT ECONOMICS
02. LAND & BUILDING
03. PLANT AND MACHINERY
04. OTHER FIXED ASSESTS
05. FIXED CAPITAL
06. RAW MATERIAL
07. SALARY AND WAGES
08. UTILITIES AND OVERHEADS
09. TOTAL WORKING CAPITAL
10. TOTAL CAPITAL INVESTMENT
11. COST OF PRODUCTION
12. TURN OVER/ANNUM
13. BREAK EVEN POINT
14. RESOURCES FOR FINANCE
15. INSTALMENT PAYABLE IN 5 YEARS
16. DEPRECIATION CHART FOR 5 YEARS
17. PROFIT ANALYSIS FOR 5 YEARS
18. PROJECTED BALANCE SHEET FOR (5 YEARS)
